85MM Car Boat GPS Speedometer Odometer 0-80MPH With 0-7000RPM Tachometer Gauge

Description

85mm Universal Digital GPS Speedometer 0-80MPH Odometer Gauge Tachometer 0-7000RPM
Features:
Suitable for Motorcycle/Marine Boats/Truck/Bus/Electric-Vehicle/Three Wheeler.ect
The signal comes directly from the satellite signal receiver(GPS Antenna), don't need other speed sensor.
Over Speed Buzzer Alarm(Value adjustable)
Indication Light (Left,Right And High Beam)
IP67 waterproof
Reverse polarity protection and anti-fogging performance
No Stationery Drift
Total Mileage Adjustable
GPS bind area odometer compensation
Technical Data:
Fixing dimension:85mm
Speed Range: 0~80MPH
RPM Range:0-7000RPM
Backlight: Amber & Red
Working Voltage: 12V/24V
Working temperatures: - 40 to 85°C
Total Mileage Adjustable, Mileage Range: 0-999 99.9 miles
GPS Blind Area Odometer Compensation
OverSpeed Buzzer Alarm (Value Adjustable)
Operation mode: LCD display, stepper motor
Function Select
Press and hold on the back button or external button, then turn on the power supply.
The LCD will show PULSE, ODO, UNIT, BUZZ, etc. You can select the function to be set after release button.
1. “PULSE” for RPM Sensor or W-terminal
After selecting “PULSE”, unit is o.01 pulses/round. For example, if LCD shows 100, it means 1 pulse per round
How to confirm RPM Ratio?
A. If your sensor is installed on the flying wheel panel, the RPM ratio is equal to the number of gears of the engine.
B. If the speed signal takes fromW-Terminal, the RPM ratio is equal to the half of the number of poles.
2. “ODO”(change total odometer)
After selecting “ODO”, the LCD will show for example “5000” (5000 km), press the button to change the flashing digit from 0 to 99999 to set the target odometer value.
3. “BUZZ”(change overspeed buzzer alarm threshold value) After selecting “BUZZ”, the LCD will show for example “B 80” (buzzer will be on when speed over 80km/h), press the button to change the flashing digit from 10 to 240 to set target overspeed buzzer alarm threshold value.
Please noted: After setting, you should disconnect both Power+ and GND, and then reconnect the two cable, then it will save the setting. If you just cut Power +, then it’ll not work properly.
Package Includes:
1x GPS speedometer
1x GPS Speed Sensor
1x Multi-plug socket
1x Installation Instruction
Wholesale and drop shipping are both welcomed
For wholesale, we will offer the discount or free express shipping which only takes 3-7 days to arrive.
For drop shipping, We could send the goods to your customers directly and won't leave information about us if youd like to.